LTZN-02S-YT1201

LTZN-02S-YT1201 Three-Color Capacitive Touch Switch with Demister Control for LED Mirrors

Description

LTZN-02S-YT1201 is a three-color capacitive touch switch for LED mirrors. It supports white, warm and neutral light modes, demister control, stepless dimming, brightness memory and DC12V 1A, 12W output.

Product Description

LTZN-02S-YT1201 is a dual-function capacitive touch switch designed for LED bathroom mirrors, smart mirrors and anti-fog mirror products. It provides separate touch control for mirror lighting and the demister function.

The switch supports AC90–250V input and provides DC12V 1A, 12W output. It is suitable for 3–5 mm glass and supports touch operation through an 18–20 mm touch area. The icon spacing is 36.5 mm.

Key Features

• Capacitive touch sensing

• White, warm and neutral light modes

• Separate mirror-light and demister control

• AC90–250V input

• DC12V 1A, 12W output

• Suitable for 3–5 mm glass

• 18–20 mm touch area

• 36.5 mm icon spacing

• White standby indicator

• Blue working indicator

• Stepless brightness adjustment

• Brightness memory function

• Suitable for LED bathroom mirrors and smart mirrors

Technical Specifications

Model: LTZN-02S-YT1201
Input: AC90–250V
Output: DC12V 1A, 12W
Sensor Type: Capacitive touch sensing
Suitable Glass Thickness: 3–5 mm
Touch Area Diameter: 18–20 mm
Icon Spacing: 36.5 mm
Light Modes: White, warm and neutral light
Standby Indicator: White light
Working Indicator: Blue light
Single-Channel Output Range: 10%–100%
Dual-Channel Output Range: 5%–50%
Product Weight: 90 g
Product Dimensions: 84 × 88 × 13.4 mm

Operating Instructions

Mirror-Light Control

Short press the light touch key to cycle through the following functions:

White light → Warm light → Neutral light → Off

When the main light is on, the blue indicator light turns on and the white indicator light turns off. When the main light is off, the blue indicator light turns off and the white indicator light turns on.

Brightness Adjustment

When the mirror light is off and the white standby indicator is on, press and hold the light touch key to turn off the standby indicator.

When the mirror light is on, press and hold the light touch key to adjust the brightness steplessly. Each long press alternates between increasing and decreasing the brightness.

When switching between light modes, the direction of the next long press is determined by the current brightness:

• When the current brightness is above 45%, the next long press decreases the brightness.

• When the current brightness is below 45%, the next long press increases the brightness.

The single-channel output range is 10%–100%, while the dual-channel output range is 5%–50%.

Demister Control

Short press the demister touch key to turn the demister function on or off.

When the demister is on, the blue indicator light turns on and the white indicator light turns off. When the demister is off, the blue indicator light turns off and the white indicator light turns on.

Brightness Memory

The switch remembers the last brightness setting. For example, if the main light is adjusted to 50% brightness and switched off after five seconds, it will return to approximately 50% brightness when switched on again.

Brightness Settings Between Light Modes

The switch supports brightness settings between different light modes. For example, when the white light is set to 10% brightness, switching to warm light and neutral light uses a 50% brightness setting for each mode.

Application Scenarios

This capacitive touch switch is suitable for LED bathroom mirrors, smart mirrors, anti-fog mirrors, mirror cabinets, hotel bathroom mirrors, home bathroom mirrors and other illuminated mirror products.